Dink Mendez Posted October 6, 2015 Report Share Posted October 6, 2015 Howdy, There was a member several years ago that was able to pour a senko with a blood line. He was using Del hand poured 2 piece molds. Has anyone accieved this method or any Ideas. I would like to learn how to do it. Quote Link to comment Share on other sites More sharing options...
MonteSS Posted October 7, 2015 Report Share Posted October 7, 2015 Open mold and hand pour each cavity on each half of the molds so not quite full. Close mold and hand pour/inject center Quote Link to comment Share on other sites More sharing options...
Dink Mendez Posted October 7, 2015 Author Report Share Posted October 7, 2015 One question Monte Pouring down the center like that won't the plastic ball up and plug and not complete the mold? Quote Link to comment Share on other sites More sharing options...
MonteSS Posted October 7, 2015 Report Share Posted October 7, 2015 I inject and is fine. Never tried hand pour Quote Link to comment Share on other sites More sharing options...
Bass-Boys Posted October 7, 2015 Report Share Posted October 7, 2015 make sure your center pour or shot is very hot so it will get to the bottom of the mold. 1 Quote Link to comment Share on other sites More sharing options...
Dink Mendez Posted October 7, 2015 Author Report Share Posted October 7, 2015 I'm new to injection for example One a 5 in stick bait,what size opening needed on the injector to run the bloodline in Quote Link to comment Share on other sites More sharing options...
Dink Mendez Posted October 7, 2015 Author Report Share Posted October 7, 2015 Please forgive me I'm assuming the bait blends and hold together good Quote Link to comment Share on other sites More sharing options...
nova Posted October 9, 2015 Report Share Posted October 9, 2015 (edited) I think you might be refering to me for the 3 color hand pour. I do it with a pyrex 4 cup. The divider is a one piece folded into a "V" and JB welded into the cup. The center section is about 1/2 the volume of the others. If I remember correctly I posted a pic of the cup in the gallery. I just checked the gallery. The pics of the baits are there but the pic of the cup is not; along with most of my pics. Don't know what happened but maybe one of the Admins can help. Edited October 9, 2015 by nova Quote Link to comment Share on other sites More sharing options...
MonteSS Posted October 10, 2015 Report Share Posted October 10, 2015 Standard injectin nozzle size is 5/8". I have a Jacobs for sale that is tapered and goes down to 1/4" Quote Link to comment Share on other sites More sharing options...
MonteSS Posted October 10, 2015 Report Share Posted October 10, 2015 Tried it with some leftovers. I could do better. Especially if I could hand pour better. 1 Quote Link to comment Share on other sites More sharing options...
Dink Mendez Posted October 10, 2015 Author Report Share Posted October 10, 2015 Thanks to everyone Thanks for the sample Monte , that is exactly what I needed answered. Quote Link to comment Share on other sites More sharing options...
Dink Master Posted October 10, 2015 Report Share Posted October 10, 2015 Top Shelf Baits makes the best that I have seen. Quote Link to comment Share on other sites More sharing options...
alsworms Posted October 10, 2015 Report Share Posted October 10, 2015 Tried it with some leftovers. I could do better. Especially if I could hand pour better. Monte.....if that's what you call a bad one, I'd like to see what you call good. LOL 1 Quote Link to comment Share on other sites More sharing options...
MonteSS Posted October 10, 2015 Report Share Posted October 10, 2015 Thanks LOL. Was my first attempt. The other three were not as nice. I had some flashing from the hand pours so I didnt inject quite hard enough not wanting to blow it out. So better hand pouring with no flashing and slightly hotter runier plastice would do a better job Quote Link to comment Share on other sites More sharing options...
