The Dutchman Posted October 13, 2015 Report Share Posted October 13, 2015 Wally World no longer carries 2 ton. Every place around here does not carry it. Where are you getting it? Thanks Quote Link to comment Share on other sites More sharing options...
mohawkman Posted October 13, 2015 Report Share Posted October 13, 2015 I get mine at Ace Hardware. Quote Link to comment Share on other sites More sharing options...
psilvers Posted October 13, 2015 Report Share Posted October 13, 2015 Tower Hobbies has 9 oz (combined) for $12.79. Sorry - I can't seem to paste the link. You can go to www3.towerhobbies.com and search for it. Pete Quote Link to comment Share on other sites More sharing options...
psilvers Posted October 13, 2015 Report Share Posted October 13, 2015 Here it goes: http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXC026&P=ML If you want it locally, just look around at a local hardware store, Home Depot, Lowe's, etc. The Tower Hobbies size is pretty big. Pete Quote Link to comment Share on other sites More sharing options...
Apdriver Posted October 13, 2015 Report Share Posted October 13, 2015 Like some of the others here, I can't find it local. Order it off Internet. Quote Link to comment Share on other sites More sharing options...
LimpNoodle Posted October 13, 2015 Report Share Posted October 13, 2015 (edited) http://smile.amazon.com/gp/product/B001BHI4JU?psc=1&redirect=true&ref_=oh_aui_detailpage_o09_s00 I've used this one instead of the Devcon and it works quite well. Amazon also has the Devcon. http://smile.amazon.com/2-ton-epoxy-two-Oz-Bottles/dp/B005K091ZU/ref=pd_sim_21_6?ie=UTF8&refRID=0B5G7MZCPT9E5GTMJAG1&dpID=41iMmDIN6ZL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_ Edited October 13, 2015 by LimpNoodle 1 Quote Link to comment Share on other sites More sharing options...
Basseducer Posted October 14, 2015 Report Share Posted October 14, 2015 What Timing!! I just put two double syringe packs in the classifieds Quote Link to comment Share on other sites More sharing options...
LimpNoodle Posted October 14, 2015 Report Share Posted October 14, 2015 On 10/13/2015 at 4:52 PM, psilvers said: Here it goes: http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXC026&P=ML If you want it locally, just look around at a local hardware store, Home Depot, Lowe's, etc. The Tower Hobbies size is pretty big. Pete None of the Lowe's or Home Depot stores around here carry it any longer. It's actually gotten pretty hard to locate. Quote Link to comment Share on other sites More sharing options...
nedyarb Posted October 15, 2015 Report Share Posted October 15, 2015 Bob Smiths 30 minute epoxy works just as well. Hobby Lobby carries it 1 Quote Link to comment Share on other sites More sharing options...
SW Lures Posted October 18, 2015 Report Share Posted October 18, 2015 I'm the same way, I can't find it anywhere local. I get mine off of Amazon. But I'm looking into other alternatives for my jigs, spoons, spinners and cranks. Dale Quote Link to comment Share on other sites More sharing options...
cadman Posted October 19, 2015 Report Share Posted October 19, 2015 On 10/18/2015 at 10:18 PM, DaleSW said: I'm the same way, I can't find it anywhere local. I get mine off of Amazon. But I'm looking into other alternatives for my jigs, spoons, spinners and cranks. Dale Tower Hobbies has the bigger bottles and the prices are really good. Quote Link to comment Share on other sites More sharing options...
psilvers Posted October 19, 2015 Report Share Posted October 19, 2015 For those of you who use Envirotex Lite - if you get on the mailing list (email) for Michaels they often have coupons for 20-40% off. That will save you some bucks - especially if you buy the larger size, which is close to $40. www.michaels.com Pete Quote Link to comment Share on other sites More sharing options...
smalljaw Posted October 19, 2015 Report Share Posted October 19, 2015 Check ACE hardware stores, some of them have it but not all of them. Home Depot or Lowes do not carry any Devcon products, at least that is what the managers told me when I asked if they can get it in. I get it from a small ACE hardware store but they don't always have it so I'm forced to buy it on Amazon and then I buy like 6 tubes. Quote Link to comment Share on other sites More sharing options...
Centigrade Posted January 2, 2016 Report Share Posted January 2, 2016 I'm not sure if this is the right forum for asking this question but is anyone having issues with devcon not sealing on rigid areas around eyes or gills. I can touch it up but I don't want to do a full second coat. Quote Link to comment Share on other sites More sharing options...
Vodkaman Posted January 2, 2016 Report Share Posted January 2, 2016 It is a well known fact that Devcon two ton (D2T) epoxy does not like sharp corners. It has been written about many times here on TU. Dave Quote Link to comment Share on other sites More sharing options...
JRammit Posted January 2, 2016 Report Share Posted January 2, 2016 I didnt know that either until i read a thread a while back about Ratl-traps... Which is something on my to do list to make, cause i love that bait! Dick Nite MCU would be my go to for a project like that... I havnt used it yet, but theres more than enough reading material here to get familiar with it Quote Link to comment Share on other sites More sharing options...
Centigrade Posted January 2, 2016 Report Share Posted January 2, 2016 If water gets to the paint on those sharp edges will the water seep under the devcon and peel off the lure? Quote Link to comment Share on other sites More sharing options...
Vodkaman Posted January 2, 2016 Report Share Posted January 2, 2016 Correct - the D2T does not have a good bond to the paint layer and it will separate. If you round the sharp edges slightly, things will improve. Dave 1 Quote Link to comment Share on other sites More sharing options...
Centigrade Posted February 18, 2016 Report Share Posted February 18, 2016 I have recently switched to evirotex lite and have been doing 2 coats instead of 1 of the devcon. I like the working time and the dry wheel seems to work but still the sharp edge issue. I guess I'll be sanding a lot more around the gills of the s-crank. Seems to only be the gills I have this problem. Any feedback would be much appreciated. Quote Link to comment Share on other sites More sharing options...
mark poulson Posted February 18, 2016 Report Share Posted February 18, 2016 Clear nail polish from the dollar store works, and doesn't chip off. Just be sure to have ventilation and/or a respirator. Quote Link to comment Share on other sites More sharing options...
Centigrade Posted February 19, 2016 Report Share Posted February 19, 2016 I work indoors with friendly products since it -30 in Canada right now. I'm attempting to round edges more with sanding sponge Quote Link to comment Share on other sites More sharing options...
