stretcher66 Posted October 14, 2015 Report Share Posted October 14, 2015 Has anyone tried the Liquid to Powder from Powder by the Pound ? It is a solution you mix your powder paint with so you can shoot it through a airbrush. https://www.powderbuythepound.com/LIQUID_2_POWDER_-1_PINT/ I have been pouring alot of saltwater jigs and think this would be a good way of doing multi colored or stenciled jigs if it works good through a airbrush. 1 Quote Link to comment Share on other sites More sharing options...
Kdog Posted October 29, 2015 Report Share Posted October 29, 2015 Ive used it quite a bit. My observations: Time consuming - must dry before baking or you will wish you had. Does not work well with some PP and/or colors - trial and error When dried then cured is equal to conventional PP Very fragile until cured Is great for mlti color paint jobs but is time consuming. Color A, dry, cure then color B. repeat as desired Quote Link to comment Share on other sites More sharing options...
BLT Posted October 31, 2015 Report Share Posted October 31, 2015 (edited) You can send regular powder through a Badger mini sandblaster air brush. Buy the air brush manifold at Harbor freight, have 2-3 air brushes and you are ready to go. I spent around $28 for mine at Amazon several years back, and it is a little more expensive now. http://www.amazon.com/Badger-Air-Brush-Co-260-1-Abrasive/dp/B0038D59UM/ref=sr_1_sc_1?ie=UTF8&qid=1446257599&sr=8-1-spell&keywords=Badger+sand+blaster I know there are others here that use it. Edited October 31, 2015 by BLT Quote Link to comment Share on other sites More sharing options...
