ChuckDiesel Posted November 2, 2015 Report Share Posted November 2, 2015 hi guys.....just started pouring my own baits.....started with worms.....ive noticed that the flat side of my worms look glossy as if store bought.....but the detailed part of the worm thats down in the mold is coming out dull......ive used a spray mog podge laquer to seal the molds but my baits are still coming out dull.....any advice.....thanks Quote Link to comment Share on other sites More sharing options...
JRammit Posted November 2, 2015 Report Share Posted November 2, 2015 It starts with the master, epoxy will give the master a smooth gloss that transfers to the mold... If your molds are RTV, it ends there If your molds are plaster, there are a variety of sealers that can change the finish of your baits... Epoxy being one of them.... Try a search on sealing plaster molds and you'll find all the other options 1 Quote Link to comment Share on other sites More sharing options...
ChuckDiesel Posted November 2, 2015 Author Report Share Posted November 2, 2015 thanks brother Quote Link to comment Share on other sites More sharing options...
