Bbob Posted November 10, 2015 Report Share Posted November 10, 2015 I was sure that I saw a similar topic a few weeks age but I can't find it in the search. Does anyone make injectors? I have a master that has details that can't be seen unless it's injected. Any thoughts? Quote Link to comment Share on other sites More sharing options...
JRammit Posted November 10, 2015 Report Share Posted November 10, 2015 Here's the thread you're lookin for... Long winded, but some good ideas within http://www.tackleunderground.com/community/topic/30363-home-made-injector/?fromsearch=1 Quote Link to comment Share on other sites More sharing options...
MonteSS Posted November 11, 2015 Report Share Posted November 11, 2015 I was sure that I saw a similar topic a few weeks age but I can't find it in the search. Does anyone make injectors? I have a master that has details that can't be seen unless it's injected. Any thoughts? Yeah buy a real injector for fifty buck. This hobby is so expensive, dont skimp here 1 Quote Link to comment Share on other sites More sharing options...
Apdriver Posted November 11, 2015 Report Share Posted November 11, 2015 ^^^^this^^^^ If you want, I can lead you to a thread where major burns are attributed to a injector not made for plastic. This stuff is dang hot and you don't want it on you. 350+ burns to the bone. 1 Quote Link to comment Share on other sites More sharing options...
JRammit Posted November 11, 2015 Report Share Posted November 11, 2015 Take note to Apdrivers comment!!!... The dangers associated trump the cost of a proper injector..... This is one area where i would discourage creativity That being said, i remember what it was like starting out... SO MANY things to buy!!! Not many can afford all that at once.... I still don't own an injector and i get along just fine.... You'll find my video in the other thread, along with the mention of a vacuum method that is still under works There are alternatives to buying an injector... But dont forget what you're dealing with 1 Quote Link to comment Share on other sites More sharing options...
Bbob Posted November 11, 2015 Author Report Share Posted November 11, 2015 Thanks. I was going to make a mold that would accommodate a injector 2 Quote Link to comment Share on other sites More sharing options...
