canuck Posted December 3, 2015 Report Share Posted December 3, 2015 Hi guys I was wondering if anyone knows of a supplier for an aluminum injection mold that matches the yum boogie tail trailer 4". Any long two tailed V pattern trailer mold would be considered and appreciated . Trailer lengths in 3,4,5" would be of interest. Thanks Quote Link to comment Share on other sites More sharing options...
mark poulson Posted December 3, 2015 Report Share Posted December 3, 2015 (edited) That is one bait I would say it is easy to make a pop mold for, even a two piece mold, if you can't find one made from aluminum. Edited December 3, 2015 by mark poulson Quote Link to comment Share on other sites More sharing options...
FATFLATTIE Posted December 3, 2015 Report Share Posted December 3, 2015 (edited) BTS makes one but it is just offered in one size 3.75". Bass tackle makes one that is 5.5" in length. I don't know of any others that are offered in multiple lengths with the exact same design. Edited December 3, 2015 by FATFLATTIE Quote Link to comment Share on other sites More sharing options...
Basseducer Posted December 3, 2015 Report Share Posted December 3, 2015 BTS can upsize or downsize an existing mold without any problem. Just call them and tell them which mold you like and what size you need. 1 Quote Link to comment Share on other sites More sharing options...
canuck Posted December 4, 2015 Author Report Share Posted December 4, 2015 Thanks guys. Some great suggestions and options to look at. I will do some research into plaster and RTV mold making and see what will work for me. Again thanks Quote Link to comment Share on other sites More sharing options...
