law651 Posted January 26, 2016 Report Share Posted January 26, 2016 What are you guys using for a clear on painted spinner blades? Quote Link to comment Share on other sites More sharing options...
cadman Posted January 26, 2016 Report Share Posted January 26, 2016 Devcon 2 Ton (D2T) 30 minute or you can use E-tex (Envirotex) which is a bar top epoxy. E-Tex is clearer than D2T 1 Quote Link to comment Share on other sites More sharing options...
LimpNoodle Posted January 26, 2016 Report Share Posted January 26, 2016 I used a lot of D2T thinned with denatured alcohol in the past. If I were going to do it today I'd use concrete sealer. Thinner coat, cheaper, much longer working life. Quote Link to comment Share on other sites More sharing options...
nedyarb Posted January 26, 2016 Report Share Posted January 26, 2016 Gst concrete sealer Quote Link to comment Share on other sites More sharing options...
mark poulson Posted January 26, 2016 Report Share Posted January 26, 2016 Clear nail polish. Quote Link to comment Share on other sites More sharing options...
RayburnGuy Posted January 26, 2016 Report Share Posted January 26, 2016 Dick Nite S81 moisture cure urethane. It was designed as a clear coat for metal spoons and unlike epoxies it doesn't pull away from edges and leave thin spots. Ben Quote Link to comment Share on other sites More sharing options...
