emptystringer81 Posted January 27, 2016 Report Share Posted January 27, 2016 I have a twin injector and I'm wondering how to get a 2 color swirl look and not all mixed up where it changes the color ya know. Quote Link to comment Share on other sites More sharing options...
jeffhill Posted January 27, 2016 Report Share Posted January 27, 2016 Remove the top cross bar that locks your injectors together. While injecting, move back and forth pulsing one injector and then the next. Keep doing this until the mold is full. This will create a swirl pattern. It works best in large volume molds (big baits or multi cavity) 2 Quote Link to comment Share on other sites More sharing options...
emptystringer81 Posted January 28, 2016 Author Report Share Posted January 28, 2016 thanks, will have to try that, I have a 2 cavity 702 craw and a 4 cavity stick bait mold, think it would work with the stick bait mold? Quote Link to comment Share on other sites More sharing options...
jeffhill Posted January 28, 2016 Report Share Posted January 28, 2016 It should work with both. The effect is just easier to get with a larger mold. I'd try the stick mold first. There is a little bit of a learning curve but you'll figure it out pretty quick. 1 Quote Link to comment Share on other sites More sharing options...
