junior77 Posted February 2, 2016 Report Share Posted February 2, 2016 someone was telling me about a coating called dick nites if i remember correctly wondering what if any thoughts you guys had on it for coating crankbaits and weres the best place to get it thanks junior77 Quote Link to comment Share on other sites More sharing options...
nedyarb Posted February 3, 2016 Report Share Posted February 3, 2016 Try doing a search for dick nite in the search. You could read for hours Quote Link to comment Share on other sites More sharing options...
junior77 Posted February 3, 2016 Author Report Share Posted February 3, 2016 thanks sounds like i better make some time lol Quote Link to comment Share on other sites More sharing options...
RayburnGuy Posted February 3, 2016 Report Share Posted February 3, 2016 As far as I know there is only one place to get Dick Nite's top coat and that is from Dick Nite. Most of us that use his top coats use the S81 moisture cured urethane, but he does make a water based formula. In my opinion the water based is not nearly as tough as the urethane. You'll also want to read up on how to store the S81. Do a search for "tap the can". Dick gives TU members a discount that is available at the link below. You have to order it from the link to get the discount. Ben http://www.dicknite.com/TU_Lander.htm 1 Quote Link to comment Share on other sites More sharing options...
junior77 Posted February 3, 2016 Author Report Share Posted February 3, 2016 AWESOME INFO SO GLAD I FOUND TU SEEMS LIKE A GREAT PLACE!! Quote Link to comment Share on other sites More sharing options...
BobP Posted February 4, 2016 Report Share Posted February 4, 2016 Dick Nite S81 is a brand of MCU custom designed for topcoating Dick Nite spoons. There are other brands of MCU designed for finishing floors. IMO, the Dick Nite works best. But you should read up on storage and application methods before you try it because it is a touchy finish that begins to harden upon contact with atmospheric moisture. Pay special attention to storing and dispensing it via the "tap the can" method. Quote Link to comment Share on other sites More sharing options...
pool 4 gold Posted February 18, 2016 Report Share Posted February 18, 2016 As long as I don't open the can of S81 I do not have storing issues correct? Have a current can in use but just ordered one for back-up to have if I run into any issues with storage. Quote Link to comment Share on other sites More sharing options...
