pete1955 Posted February 21, 2016 Report Share Posted February 21, 2016 I have used a floating worm for years here in NC made by a local company that is out of business now. The worm is about 6 inches but has a small flat tail not like the zoom trick worm. The key to the worm is the softness and of coarse that little flat tail. I have searched most of the mold companies but have not seen anything close to a worm like that. I was wondering if any of you folks have seen anything like that I would be interested in buying a mold for sure. Caught a lot of fish with this bait. I will try to get a picture posted of the worm I just don't have one here with me. Quote Link to comment Share on other sites More sharing options...
FATFLATTIE Posted February 21, 2016 Report Share Posted February 21, 2016 Was it a Danny's Floating Worm? Or something like that? I know what style worm you are talking about and I haven't seen any molds like it for sale. Probably the closest would be some of the full round "treat worms" from bass tackle or BTS but they don't have the flat tail like that worm has. Quote Link to comment Share on other sites More sharing options...
pete1955 Posted February 22, 2016 Author Report Share Posted February 22, 2016 Yes that is the style worm I am talking about. That small flat tail and the extra soft plastic made them a very good worm. IT was very soft like a one fish bait. It was much better than the zoom trick worm as it was so much easier to fish at a slow pace. Danny Joe made a worm close to what I am talking about. Worm is 6 1/4 inches inches long. The only worm I have seen that even resembles it is that 6 inch do it finesse worm. Quote Link to comment Share on other sites More sharing options...
big will's customs Posted February 22, 2016 Report Share Posted February 22, 2016 I know that the honey hole floaters were made by a couple companies by using honey holes custom mold he had made . Im not sure who molded Danny Joes if it was a custom mold or if he had haw river or another company make his for him. Ive looked and priced a custom mold to match. take care god bless Quote Link to comment Share on other sites More sharing options...
Vodkaman Posted February 22, 2016 Report Share Posted February 22, 2016 That would be a very easy mold to make by hand. Dave 1 Quote Link to comment Share on other sites More sharing options...
AZ Fisher Posted February 22, 2016 Report Share Posted February 22, 2016 I agree with Vodkaman. If you searched here or Youtube for how to POP(plaster of paris) molds, I think you could use one of your existing worms to make a mold for yourself for hand pouring. You'll always have a flat side with a POP one piece mold, I haven't had much luck with a two piece POP mold. If you try this make sure you make a multiple cavity mold, should be easy with that size worm. I don't have any silicone mold making experience. POP has worked for me many times. Quote Link to comment Share on other sites More sharing options...
nedyarb Posted February 22, 2016 Report Share Posted February 22, 2016 Maybe this mold, its the el gusano worm. I dont own one but it says the tail is flat. Quote Link to comment Share on other sites More sharing options...
