emptystringer81 Posted February 25, 2016 Report Share Posted February 25, 2016 I'm looking to the closest thing to the Zooms baby brush hog mold. I believe the baby brush hog is 4" and everything I find is 4 1/2" or 6". I know they cant duplicate zoom because of patent reasons, but I just have a lot of confidence in the zoom baby brush hogs in the past. The 1/2 inch don't really bother me but I want it to be close to the same action and bait thickness. I measured zooms and theirs is .295 Quote Link to comment Share on other sites More sharing options...
FATFLATTIE Posted February 25, 2016 Report Share Posted February 25, 2016 I have athe couple BTS four cavity flippin hogs and they are great. Catch plenty of fish, as far as I'm concerned if I could only have one bait that would be it. Molds shoot flawlessly too. Quote Link to comment Share on other sites More sharing options...
emptystringer81 Posted February 25, 2016 Author Report Share Posted February 25, 2016 Have u done laminates with twin injector with it or swirl Quote Link to comment Share on other sites More sharing options...
rynesgto Posted February 25, 2016 Report Share Posted February 25, 2016 Basstackles baby brush hog mold is identical IMO. Putting the baits next to each other, I can't tell a single difference. Quote Link to comment Share on other sites More sharing options...
archery1 Posted February 25, 2016 Report Share Posted February 25, 2016 I have bobs design and it shoots lams ,swirls good.Not willing to sell though Quote Link to comment Share on other sites More sharing options...
emptystringer81 Posted February 25, 2016 Author Report Share Posted February 25, 2016 Archery I was looking at that one, do u have the 4 or 2 cavity Quote Link to comment Share on other sites More sharing options...
archery1 Posted February 25, 2016 Report Share Posted February 25, 2016 Archery I was looking at that one, do u have the 4 or 2 cavity All mine are 4 cavity molds Quote Link to comment Share on other sites More sharing options...
emptystringer81 Posted February 26, 2016 Author Report Share Posted February 26, 2016 Cool thank you Quote Link to comment Share on other sites More sharing options...
FATFLATTIE Posted February 26, 2016 Report Share Posted February 26, 2016 I shot them once with a really crappy twin jector setup and it shot like all my other molds do with my setup. One bad bait one passable bait and two perfect. But That is just my twin jector. The molds should work fine with one of the Bass Tackle blending block systems. Quote Link to comment Share on other sites More sharing options...
emptystringer81 Posted February 26, 2016 Author Report Share Posted February 26, 2016 Flattie what twin injector do u have? I have the bass tackle one I've had for month or two, still getting used to it Quote Link to comment Share on other sites More sharing options...
FATFLATTIE Posted February 26, 2016 Report Share Posted February 26, 2016 I just bought the small bass tackle blending block and bought an extra injector from Do It because I already had one. It is VERY difficult to get both injectors to start at the same time and have continuous flow since the plungers and injector tubes aren't connected. I just use a piece of thick cardboard to press both plungers....it is less than ideal hahaha! Quote Link to comment Share on other sites More sharing options...
emptystringer81 Posted February 26, 2016 Author Report Share Posted February 26, 2016 I can't seem to get ahold of bts mold and from looks of their Facebook no one else can, and have been waiting for their mold for month Quote Link to comment Share on other sites More sharing options...
FATFLATTIE Posted February 26, 2016 Report Share Posted February 26, 2016 I just got two molds from him and it took a little over three weeks. And I was unable to get in touch with him but the molds will come if ya order them. It seems that he may be approaching his maximum work load. Quote Link to comment Share on other sites More sharing options...
majic man Posted February 26, 2016 Report Share Posted February 26, 2016 I got two of the 4 cavity bts molds for sale. Pm me. Quote Link to comment Share on other sites More sharing options...
emptystringer81 Posted February 26, 2016 Author Report Share Posted February 26, 2016 Awesome, pm sent Quote Link to comment Share on other sites More sharing options...
FATFLATTIE Posted February 26, 2016 Report Share Posted February 26, 2016 You will be very happy with those molds man! Most versatile, fish cathinest bait I have in my box! Quote Link to comment Share on other sites More sharing options...
Bass-Boys Posted February 26, 2016 Report Share Posted February 26, 2016 I have sent 2 emails to BTS ( Bobs ) with no reply . Quote Link to comment Share on other sites More sharing options...
emptystringer81 Posted February 27, 2016 Author Report Share Posted February 27, 2016 Thanks guys, cant wait to try these out, bush hig has been my favorite bait for along time 1 Quote Link to comment Share on other sites More sharing options...
archery1 Posted February 28, 2016 Report Share Posted February 28, 2016 I have sent 2 emails to BTS ( Bobs ) with no reply . Join CLUB sent numerous emails phone calls. offered money for samples of his bent worm.Got ahold of some one that takes care of his F.B. page 2 1/2 weeks ago. they said o we will send samples out.. never got them. nothing. Done with tryin 1 Quote Link to comment Share on other sites More sharing options...
emptystringer81 Posted February 28, 2016 Author Report Share Posted February 28, 2016 Yeah, He has nice products, but dont sound like its worth the trouble, when there is soo many other people out there that makes molds. I heard they had a machine go down and that its setting them back. Maybe they will get it fixed and get on top of their game. Quote Link to comment Share on other sites More sharing options...
