ING Posted March 5, 2016 Report Share Posted March 5, 2016 Is somebody has tried to make silver-plating of the blades? Will appreciate for sharing experience. Quote Link to comment Share on other sites More sharing options...
LimpNoodle Posted March 5, 2016 Report Share Posted March 5, 2016 Which blades? Most common spinner blades are available with silver plating already. Quote Link to comment Share on other sites More sharing options...
ING Posted March 6, 2016 Author Report Share Posted March 6, 2016 Thank you LimpNoodle!. I know that. But I've asked something different... Quote Link to comment Share on other sites More sharing options...
toadfrog Posted March 7, 2016 Report Share Posted March 7, 2016 I haven't tried but I have seen some small quantity plating done on you tube as a home project . Quote Link to comment Share on other sites More sharing options...
LimpNoodle Posted March 7, 2016 Report Share Posted March 7, 2016 I've done it for steelhead blades in the past. You'll end up with what's called a white silver finish. It's not going to be bright and polished. In some cases the less flashy finish is desired. You can plate them and then polish them if you want. But with the cost and work it's easier and cheaper IMHO to just buy them already plated. To get an amount of silver on the blade so you can polish it you really need to go with a electroplating system. Quote Link to comment Share on other sites More sharing options...
