legal limit Posted August 20, 2004 Report Share Posted August 20, 2004 I was wondering what you guys suggest to use to hold the fiber weede guard in place on jigs. I was thinking of an epoxy but not quite sure, any help would be appreciated Quote Link to comment Share on other sites More sharing options...
siebler_custom_baits Posted August 20, 2004 Report Share Posted August 20, 2004 epoxy or pour in the head. Quote Link to comment Share on other sites More sharing options...
Markell Posted August 20, 2004 Report Share Posted August 20, 2004 Devcon or Zap-A-Gap Quote Link to comment Share on other sites More sharing options...
legal limit Posted August 20, 2004 Author Report Share Posted August 20, 2004 thanks, I believe i will try the epoxy, I had thought about the pour in the heads however this pretty much eliminates the powder paint option unless I am missing something. If I am please fill me in. Quote Link to comment Share on other sites More sharing options...
Jig Man Posted August 20, 2004 Report Share Posted August 20, 2004 When I glue them in I use JB Weld. I have never had one come out. I sometimes use a plastic coated cable (I can't remember the name) for a weed guard. On another post it was mentioned that one can pour single jigs with fiber guard then immediately dip into powder paint. I tried it on black and brown with 3/8 and 1/2 oz football heads. The 1/2 did just fine but the 3/8 dried with a dull finish. The bass didn't seem to mind Tuesday night. Next time I will turn up the heat on the lead pot to see if that helps. Quote Link to comment Share on other sites More sharing options...
