bassattackbaits Posted April 5, 2016 Report Share Posted April 5, 2016 What's the closest swimbait mold to the 3.8 inch keitech and anyone know how to make the bottom half of the keitech rainbow shad color? Quote Link to comment Share on other sites More sharing options...
walleyeking Posted April 5, 2016 Report Share Posted April 5, 2016 I don't own them but lurecraft and bass tackle both have a 3.5" that looks real close. Quote Link to comment Share on other sites More sharing options...
Big Ray Posted April 5, 2016 Report Share Posted April 5, 2016 (edited) If I was you I would get the Basstackle 631 mold in top inject. That is the next swimbait mold I am going to get. The Lurecraft mold looks good but you can't get a back and belly laminate. Edited April 5, 2016 by Big Ray Quote Link to comment Share on other sites More sharing options...
nedyarb Posted April 5, 2016 Report Share Posted April 5, 2016 631= perfect Quote Link to comment Share on other sites More sharing options...
wannabe Posted April 10, 2016 Report Share Posted April 10, 2016 This is bass tackle 631 1 Quote Link to comment Share on other sites More sharing options...
LureCraft Posted July 19, 2016 Report Share Posted July 19, 2016 We now have an adapter so you can get a back/belly color on any of our swim bait molds. 1 Quote Link to comment Share on other sites More sharing options...
MonteSS Posted July 19, 2016 Report Share Posted July 19, 2016 We now have an adapter so you can get a back/belly color on any of our swim bait molds. You have a link Kim? ty Quote Link to comment Share on other sites More sharing options...
archery1 Posted July 19, 2016 Report Share Posted July 19, 2016 Kim do u make a kt swing fat swimbait or is it just the regular ones? Quote Link to comment Share on other sites More sharing options...
DaveMc1 Posted July 19, 2016 Report Share Posted July 19, 2016 Hey Kim, if you are referring to this adaptor http://www.lurecraft.com/Double-Injectioner-Adapter/productinfo/2X218/ then no it won't work properly with all your molds. In the description you have mold 5XLU-989 ( http://www.lurecraft.com/4-1_2-KT-Swim-Bait-Alum-2-Cav-2-Pc-Injection/productinfo/5XLU-989/ ) listed which is a 2 cavity side injection mold. It is not an offset mold so the left and right sides are cut into the mold plates leaving you with a bait that has the left side one colour and the right side another colour, NOT a back/belly laminate as it states. Looking at the molds listed on the adaptor page, 5XLU-141 is the only mold listed that will laminate properly with that adaptor. In order for the swimbaits to laminate back/belly the way you are cutting them they need their own injection ports (or an H-bar runner which you'll only see on production molds). The only somewhat economical way to properly laminate a multi cavity swimbait like the keitech is to do what Bob @ BTS has done and make an offset mold. BaitJunky's and BassTackle have made most if not all their injection swimbait molds available with single port injection to allow them to be laminated with the standard dual injectors on the market. 2 Quote Link to comment Share on other sites More sharing options...
