bluedragon2k9 Posted April 13, 2016 Report Share Posted April 13, 2016 Hello, I have been air brushing with a tankless compressor.I bought a air compressor from walmart but my air brush hose does not fit it.I was needing to know what adapter to buy my air brush is a master g44. Quote Link to comment Share on other sites More sharing options...
21xdc Posted April 13, 2016 Report Share Posted April 13, 2016 (edited) TCP Global have many fittings or adapters that should get you hooked up. Edited April 13, 2016 by 21xdc Quote Link to comment Share on other sites More sharing options...
bluedragon2k9 Posted April 13, 2016 Author Report Share Posted April 13, 2016 yea i been on there but i just cant figure out which one i need Quote Link to comment Share on other sites More sharing options...
MarkSpolarich Posted April 13, 2016 Report Share Posted April 13, 2016 I am going to presume you are either having problems attaching the hose to your compressor or the hose to your airbrush. Either way, finding the right fitting is as simple as going to your nearest hardware store. They should have a selection of brass fittings readily available to fit your needs. Just take in your hose if the connection to the compressor is your problem; take both the hose and airbrush if the connection between the two is your problem. Good luck! Quote Link to comment Share on other sites More sharing options...
bluedragon2k9 Posted April 13, 2016 Author Report Share Posted April 13, 2016 i tried that they told me that my compressor takes 1/4 npt connection but my airbrush uses a 1/8 bsp. So it looks like I need a 1/4 npt male to a 1/8 bsp male and I cannot find that anywhere.I need the 1/4 npt end to connect to my compressor then the 1/8 bsp male to connect to my 1/8 bsp female hose. Quote Link to comment Share on other sites More sharing options...
nedyarb Posted April 13, 2016 Report Share Posted April 13, 2016 Lowes home depot harbor freight all have the adapters Lowes home depot harbor freight all have the adapters Quote Link to comment Share on other sites More sharing options...
Richard Prager Posted April 13, 2016 Report Share Posted April 13, 2016 You can try Northern Tools Quote Link to comment Share on other sites More sharing options...
Musky Glenn Posted April 13, 2016 Report Share Posted April 13, 2016 I have had the most luck finding those hard to find parts in a good plumbing or air conditioning shop. Quote Link to comment Share on other sites More sharing options...
Boondox Posted June 11, 2016 Report Share Posted June 11, 2016 (edited) at tcpglobal.com the item number for the hose is: Item #: ABD TH-021 you got to get a air chuck quick connect adaptor 1/4 npt thread for the end for like adding to power tools form the store... you can get it at like lowes or home depot etc... one end of hose gets the air chuck quick connect adaptor the other goes to your air brush... you may want to put a regulator on the compressor to regulate it down to useable psi for the air brush if it don't got it already! mounted to the compressor... that's a master premium air bush hose 6 foot long they do have longer if you need them? Edited June 11, 2016 by Boondox Quote Link to comment Share on other sites More sharing options...
SW Lures Posted June 11, 2016 Report Share Posted June 11, 2016 I use these types of fitting all the time. That size is a normal size reducer. Try a plumbing suppliers too. Some airbrush sales supply this fitting to. Home Depot, Lowes, plumbing suppliers; you should find something at any of these as long as it's NPT, there are many other thread types out there. I'll just throw this out there, it could even be a hydraulic type connector but I doubt it. Most of these places has a sample board with different size and types of samples (threads, sizes, etc.) that you can match up with. I'm wondering if this hose is NPT. Some of these sales people just don't know what they are seeing or just say this. Make sure first what type of thread that you have at the hose. I'm pretty sure that the compressor would be NPT (US, National Pipe Thread). Good luck, Dale Quote Link to comment Share on other sites More sharing options...
TerryF2858 Posted June 11, 2016 Report Share Posted June 11, 2016 try graniger.com or one of the racing parts websites, ie summit, pegasus or http://www.chicagoairbrushsupply.com/nsearch.html?query=adapters&searchsubmit=Go%21&vwcatalog=yhst-80343540264639&.autodone=http%3A%2F%2Fwww.chicagoairbrushsupply.com%2Faccesories.html Quote Link to comment Share on other sites More sharing options...
