mountainryan Posted April 19, 2016 Report Share Posted April 19, 2016 Hello TU clan. Thanks for all the groundwork and experiments you guys have done. Soo much great information. So here she is, my first posted bait. Not my first bait. I used to make a ton of triple trout clones by pouring epoxy. Here is how she was made. PVC board blank hand carved, Foil finish technique posted by Husky- i based my blanks off of a picture and used that same photo to make the three separate graphics. one for the belly and each side. sealed with two coats solarez tail is temporary laminated plastic sheeting- any input on a permanent replaceable tail would be huge hook hangers are hand twisted wire where i live they just banned lead weights so i had to buy a mold and hand pour those too It is a suspending (almost perfect) wide S swimmer. pulls almost 1.5 ft turns with a slight roll like a sick bluegill. Link to comment Share on other sites More sharing options...
mark poulson Posted April 19, 2016 Report Share Posted April 19, 2016 Good job! Link to comment Share on other sites More sharing options...
JBlaze Posted April 20, 2016 Report Share Posted April 20, 2016 Good job! x2 Link to comment Share on other sites More sharing options...
Nathan Posted April 20, 2016 Report Share Posted April 20, 2016 We love seeing your creations..but they need to be put in the Gallery..Nathan 1 Link to comment Share on other sites More sharing options...
