porkmeatballs Posted April 23, 2016 Report Share Posted April 23, 2016 Whats up y'all! I was wondering if I have to clear coat the resin inside my swimbait's joints ( this is a pinned joint style). Is this really necessary? I've always had bad experiences with epoxy in the joint. Thanks guys Quote Link to comment Share on other sites More sharing options...
mark poulson Posted April 23, 2016 Report Share Posted April 23, 2016 (edited) I use PVC (similar to resin in that it is totally waterproof) for my jointed baits, and I use clear nail polish inside the joints. Then I brush Solarez resin onto the finished bait faces and have no problems. I've even used brush on crazy glue inside the joints, so I don't gum them up, but the nail polish is easy to apply, thin, and tough. Edited April 23, 2016 by mark poulson Quote Link to comment Share on other sites More sharing options...
porkmeatballs Posted April 26, 2016 Author Report Share Posted April 26, 2016 Thanks for that input! But since the resin is also waterproof would I still have to clear coat it? Quote Link to comment Share on other sites More sharing options...
Nathan Posted April 26, 2016 Report Share Posted April 26, 2016 If you want to protect the paint in this area..I would say yes..Nathan 1 Quote Link to comment Share on other sites More sharing options...
