dr.olds Posted April 27, 2016 Report Share Posted April 27, 2016 Good day all. I recently made a mould to shoot some curly tails for one of my creature baits. Given that the tails will be cool when inserted into the main mould. Is there anything i should be doing to promote a proper join between the two parts. Thanks in advance Noel. Quote Link to comment Share on other sites More sharing options...
Bass-Boys Posted April 27, 2016 Report Share Posted April 27, 2016 make sure you body color is good and hot to melt the tail and weld good . 1 Quote Link to comment Share on other sites More sharing options...
dr.olds Posted April 27, 2016 Author Report Share Posted April 27, 2016 Thanks Jeff. Do you find the body is more prone to dents if you get too hot ? Noel Quote Link to comment Share on other sites More sharing options...
FATFLATTIE Posted April 27, 2016 Report Share Posted April 27, 2016 One thing to also remember is if you make a bunch of tails and let them sit for even a day or two they will get a little oily on the surface and not make a good connection. If you do that just clip a little bit off the tail and you should be fine. It's either that or clean each one with alcohol and that doesn't sound like any fun. I usually just make enough for what I'm making that day. Quote Link to comment Share on other sites More sharing options...
