Painter1 Posted May 15, 2016 Report Share Posted May 15, 2016 I need a mixer bit for my drill that will collapse and fit in a 1 gallon jug. I know it's been discussed before but I can't find it. Quote Link to comment Share on other sites More sharing options...
Vodkaman Posted May 16, 2016 Report Share Posted May 16, 2016 I took part in that discussion. I have just done all the relevant word searches and can find nothing. There were some posts lost in a crash, so this may have been one of them. DAve Quote Link to comment Share on other sites More sharing options...
majic man Posted May 16, 2016 Report Share Posted May 16, 2016 http://www.amazon.com/dp/B003U6H7HK/ref=asc_df_B003U6H7HK4185605?smid=ATVPDKIKX0DER&tag=shopzilla0d-20&ascsubtag=shopzilla_rev_257-20;14634009232895081275810070301008005&linkCode=df0&creative=395093&creativeASIN=B003U6H7HK 2 Quote Link to comment Share on other sites More sharing options...
mark poulson Posted May 16, 2016 Report Share Posted May 16, 2016 http://www.amazon.com/dp/B003U6H7HK/ref=asc_df_B003U6H7HK4185605?smid=ATVPDKIKX0DER&tag=shopzilla0d-20&ascsubtag=shopzilla_rev_257-20;14634009232895081275810070301008005&linkCode=df0&creative=395093&creativeASIN=B003U6H7HK Is 8" long enough to stir a gallon jug? Quote Link to comment Share on other sites More sharing options...
Painter1 Posted May 16, 2016 Author Report Share Posted May 16, 2016 Is 8" long enough to stir a gallon jug? No, but the 18" one is. Just ordered it. Thank you. 2 Quote Link to comment Share on other sites More sharing options...
majic man Posted May 16, 2016 Report Share Posted May 16, 2016 Your welcome, I know a few guys using them that love them. 1 Quote Link to comment Share on other sites More sharing options...
archery1 Posted May 17, 2016 Report Share Posted May 17, 2016 quick on the trigga he is!!! lol Is 8" long enough to stir a gallon jug? 1 Quote Link to comment Share on other sites More sharing options...
mark poulson Posted May 17, 2016 Report Share Posted May 17, 2016 quick on the trigga he is!!! lol And they say size doesn't matter! Hahaha Quote Link to comment Share on other sites More sharing options...
Painter1 Posted June 2, 2016 Author Report Share Posted June 2, 2016 Well, I ordered one, but they either don't make them anymore or are indefinitely back ordered Any other ideas are welcome Quote Link to comment Share on other sites More sharing options...
majic man Posted June 2, 2016 Report Share Posted June 2, 2016 http://www.praziusa.com/stirwhip-18-mixer/ you call the number? Quote Link to comment Share on other sites More sharing options...
Painter1 Posted June 3, 2016 Author Report Share Posted June 3, 2016 I ordered through Amazon. I had an idea - what do you think? Threaded rod with a sequence of nut- cable tie, nut-cable tie. Maybe 4 to 6 of these with the cable tie tag ends about 4.5 inches long. May have to glue the ties to keep them from slipping while spinning. 1 Quote Link to comment Share on other sites More sharing options...
majic man Posted June 3, 2016 Report Share Posted June 3, 2016 I could see it with the big 1/2 ties maybe working ok. Or even take the threaded rod and cut a paddle from a sheet of silicone, about 1/4" thick. 1 Quote Link to comment Share on other sites More sharing options...
