Scottzkee Posted June 9, 2016 Report Share Posted June 9, 2016 Looking to find some pictures of everyone's injection systems and stations. Has anyone here homeade any air compressor stations for injection of molds? Quote Link to comment Share on other sites More sharing options...
goldenshinner Posted June 9, 2016 Report Share Posted June 9, 2016 I was chatting with a guy in Minneapolis that converted a pressurized presto pot by adding a simple air pump like used for aquariums,and had drilled and taped.threads on bottom of pot.adding a brass shut off valve with nozel.it had a open valve that allowed air to flow thru pot.when this valve was shut,the pressute would build and push plastic thru bottom spout..it doesn't fully make sense when I think about it..I'm probably missing some details..but it was a functioning home brew production machine..if I would add my thoughts.if the pots aluminum,I'd be tempted to add the biggest magnetic stirring pin I could find, and rig or convert a stiring plate Quote Link to comment Share on other sites More sharing options...
goldenshinner Posted June 9, 2016 Report Share Posted June 9, 2016 Its funny I also chatted with a department head that retired from a local plastic research lab He said the only plastic he would not allow in his lab was "the vinyl stuff"..PVC..because its long term dangers.this warning kinda freaked me out a little..I'm switching to remote pressurized breathing air I think.. Quote Link to comment Share on other sites More sharing options...
goldenshinner Posted June 9, 2016 Report Share Posted June 9, 2016 Full face mask,pressurized remote air hose Quote Link to comment Share on other sites More sharing options...
Dotiften Posted June 14, 2016 Report Share Posted June 14, 2016 Make all mine outside in open air only on good weather days until i setup the garage to suit me Quote Link to comment Share on other sites More sharing options...
