Boondox Posted June 11, 2016 Report Share Posted June 11, 2016 any one know were i can find one cheap? i can go to a machine shop and it cost around $400 to $600 to make from aluminum any one know were to find one? for a 2 pound surf claw sinker? Quote Link to comment Share on other sites More sharing options...
andy1976 Posted June 11, 2016 Report Share Posted June 11, 2016 I wonder if you could sand cast them using foundry sand. Have you checked Shawn Collins? Quote Link to comment Share on other sites More sharing options...
nedyarb Posted June 11, 2016 Report Share Posted June 11, 2016 http://www.hiltsmolds.com/ClawSinkerMolds.htm Are these what you want? Quote Link to comment Share on other sites More sharing options...
Boondox Posted June 12, 2016 Author Report Share Posted June 12, 2016 the hilz mold look like it but it is only ounces i need it in pounds... Quote Link to comment Share on other sites More sharing options...
jonister Posted June 13, 2016 Report Share Posted June 13, 2016 You might want to try asking this in the wire baits section. There's a ton of people there who pour lead and might know. Good luck! 1 Quote Link to comment Share on other sites More sharing options...
