WebbsBaits21 Posted June 26, 2016 Report Share Posted June 26, 2016 Hey guys. I've gotten into pouring stick baits "senkos" I'm having an issue with them. When I pull them from the mold there will be some flat spots on some of the worms any idea what's going on? Quote Link to comment Share on other sites More sharing options...
Jig Man Posted June 26, 2016 Report Share Posted June 26, 2016 (edited) Try pouring slower and fill all the cavatives to the point of running over. You may also need to fashion some spru extenders. I use copper pipe joints. Edited June 26, 2016 by Jig Man Quote Link to comment Share on other sites More sharing options...
mark poulson Posted June 27, 2016 Report Share Posted June 27, 2016 I have the Essential 5" senko mold, and I have to hold pressure for a few seconds. I am also careful to shoot at 315-325. Hot plastic shrinks as it cools, and gives me dents. Quote Link to comment Share on other sites More sharing options...
MonteSS Posted June 27, 2016 Report Share Posted June 27, 2016 Hold firm pressure 10 secs after filled. Top off every 10 secs as many times as needed. Never let the fill hole go down. Quote Link to comment Share on other sites More sharing options...
Bassinfool Posted June 28, 2016 Report Share Posted June 28, 2016 Which mold do you have by chance and are you hand pouring or injecting your baits? Quote Link to comment Share on other sites More sharing options...
ipt Posted June 29, 2016 Report Share Posted June 29, 2016 copper pipe joints are your friend, sockets work well too. after the mold is filled, put the fitting over the sprue and top it off 1 Quote Link to comment Share on other sites More sharing options...
