MonteSS Posted August 1, 2016 Report Share Posted August 1, 2016 Had this very thin metal in my basement. Forgot what it's called. Flashing?Cut to size of mold with scissors. Marked holes and drilled them. Cut nozzle slot with scissors. Took like ten mins.Clamp between mold and shoot. Bonus is you get eight haves rather tha four from a traditional plate. Put halves back in mold and shoot second color. 2 Quote Link to comment Share on other sites More sharing options...
mark poulson Posted August 1, 2016 Report Share Posted August 1, 2016 Clever idea! Quote Link to comment Share on other sites More sharing options...
Chuck Young Posted August 1, 2016 Report Share Posted August 1, 2016 Nice idea. How fast do you have to work so the two halves join? Or is this a none issue? Quote Link to comment Share on other sites More sharing options...
MonteSS Posted August 2, 2016 Author Report Share Posted August 2, 2016 (edited) I made 24 halves in white and put them aside laying flat. I then started putting them back in the molds and shot the back. I do the white first because I shoot the darker back color at a slightly higher temp that would possibly discolor the white. Total time to make 24 baits was about an hour Edited August 2, 2016 by MonteSS Quote Link to comment Share on other sites More sharing options...
