basscat28 Posted October 28, 2016 Report Share Posted October 28, 2016 I've been trying some baitmold molds and the baits stick in the mold something fierce and I've only had experience with aluminum molds and silicone hand put molds. What's the best mold release. I tried some oily scent I have with no luck. Quote Link to comment Share on other sites More sharing options...
mark poulson Posted October 28, 2016 Report Share Posted October 28, 2016 I use spray PAM, and nothing sticks. Quote Link to comment Share on other sites More sharing options...
B Neagle Posted October 29, 2016 Report Share Posted October 29, 2016 I purchased the grease they sell only apply it about every 4th time and have not had any sticking issues. Quote Link to comment Share on other sites More sharing options...
MonteSS Posted October 31, 2016 Report Share Posted October 31, 2016 I use nothing and they dont stick bad at all. 1 Quote Link to comment Share on other sites More sharing options...
McLuvin175 Posted October 31, 2016 Report Share Posted October 31, 2016 Not very familiar with the "artificial stone" material that they use. I will say this; things like worm oil and most scents have plasticizer in them and using them as a mold release can actually make the baits stick worse in my experience. I have never used Pam before but doesnt the Lecithin they use polymerize and tack up on the bait over time? Seems like the Di-Methyl Silicone they use would make painting a nightmare. Quote Link to comment Share on other sites More sharing options...
