EironBreaker Posted December 5, 2016 Report Share Posted December 5, 2016 (edited) Its been a long time since I've bought clevises. For typical sizes, like 3/8 and 1/2 oz SBs, the right size is a #4 correct? I believe I bought that size many years ago, they were about 7 mm across. EZ spin type. LPO the best price source by 1000? I have an excise tax #. Edited December 5, 2016 by EironBreaker mispelling Quote Link to comment Share on other sites More sharing options...
mark poulson Posted December 5, 2016 Report Share Posted December 5, 2016 I just make sure the clevis is for the wire diameter of my spinnerbait. Email where you want to buy them, and ask them what size is right. Quote Link to comment Share on other sites More sharing options...
smalljaw Posted December 5, 2016 Report Share Posted December 5, 2016 A size 3 is what is used most of the time for those size spinnerbaits. The size 3 stirrup or EZ spin clevis will work on any wire diameter smaller than .045". Quote Link to comment Share on other sites More sharing options...
EironBreaker Posted December 5, 2016 Author Report Share Posted December 5, 2016 Thanks smalljaw, I use mostly 0.040" wire forms so the #3 will work. I found Hagen's has the best price I've found so far. Quote Link to comment Share on other sites More sharing options...
Apdriver Posted December 6, 2016 Report Share Posted December 6, 2016 I know a # 2 won't work on .040 wire. Hole diameter is too small. Quote Link to comment Share on other sites More sharing options...
