DingerBaits Posted January 25, 2017 Report Share Posted January 25, 2017 Does any one have any insight on which is better? Looking at the different properties, both seem good, but I would like a little input. Thanks Quote Link to comment Share on other sites More sharing options...
slayer_21420 Posted January 26, 2017 Report Share Posted January 26, 2017 I chose alumilite because you can adjust the bouyancy by adding more or less micro balloons. The featherlite is always a 100% fill from what I understand. another bonus to alumilite white is the demold time is around 5 minutes if you preheat your mold. 1 Quote Link to comment Share on other sites More sharing options...
DingerBaits Posted January 26, 2017 Author Report Share Posted January 26, 2017 I did see that the de-mold time was a lot lower and that is what got me leaning towards the Alumilite. I guess my biggest concern is with the strength of where the pin goes through my piano style hinges. Quote Link to comment Share on other sites More sharing options...
slayer_21420 Posted January 26, 2017 Report Share Posted January 26, 2017 The alumilite is really strong once fully cured, I don't think you'd have any issues 1 Quote Link to comment Share on other sites More sharing options...
DingerBaits Posted January 26, 2017 Author Report Share Posted January 26, 2017 Thanks, I appreciate the input Quote Link to comment Share on other sites More sharing options...
