BrianB Posted February 8, 2017 Report Share Posted February 8, 2017 What other plastic production pots (non injected) are out there similar to Bears Presto pots? Or is there some kind of do it yourself type plan alternative? Quote Link to comment Share on other sites More sharing options...
BHLures Posted February 9, 2017 Report Share Posted February 9, 2017 There are a lot of options out there but you'll have to step outside of lure making. I found the candle industry has more available to shop from on-line. Especially for the hand pour guys. Also, they really are not hard to make. Start searching forums, you tube, etc.. Lots of good info to be found. If I were building a dual set up I would start with a heated blending block from Ultra Molds. You'll have to buy their injectors though (which I really like that he offers offset injectors too). Pretty simple set up really. Then there are stirring systems. Nothing wrong with the ones available through lure making suppliers. Not that difficult to make either. All depends on your skill set and what you're willing to spend. Hope this helps and good luck. Quote Link to comment Share on other sites More sharing options...
BHLures Posted February 9, 2017 Report Share Posted February 9, 2017 Though I think most hand pour guys will tell you to go steel pot and ladle for consistency. Presto pots loose pressure as they empty causing you to constantly adjust. Quote Link to comment Share on other sites More sharing options...
