Sfrye37 Posted February 24, 2017 Report Share Posted February 24, 2017 Can you guys post some links to where I can get epoxy from to coat my finished lures. I am having trouble finding what I need. I have used gorilla glue 5 minute epoxy and it seems to work fine. I just wonder if I should be using something else and where could I get it. Quote Link to comment Share on other sites More sharing options...
stretcher66 Posted February 24, 2017 Report Share Posted February 24, 2017 (edited) devcon 2 ton (aka.. D2T) 30 min epoxy or Bob Smith (BSI) 30 min epoxy . BSI the problem with the 5 minute is it develops a brownish tint when exposed to UV rays. And the other problem is 5 minutes to brush it on is way to fast. you would be lucky to get 2 lures done before it sets up. do a search for 5 minute epoxy on here there is tons of threads about it and other top coats. Edited February 24, 2017 by stretcher66 Quote Link to comment Share on other sites More sharing options...
AZ Fisher Posted February 24, 2017 Report Share Posted February 24, 2017 Devcon 2 Ton, Tower hobbies, best price I've found, get the 30 min. Quote Link to comment Share on other sites More sharing options...
MikePaintsBaits Posted February 24, 2017 Report Share Posted February 24, 2017 I Use The 30 Min Devcon (Clear) , The 5 Min Isn't Going To Work , As The Guys Above Have Stated , It Will Start To Set. Mike Quote Link to comment Share on other sites More sharing options...
mark poulson Posted February 24, 2017 Report Share Posted February 24, 2017 The Decon 5 minute epoxy is only water resistant, not water proof like the D2T. Quote Link to comment Share on other sites More sharing options...
JRammit Posted February 24, 2017 Report Share Posted February 24, 2017 If you have an Ace Hardware nearby, you can pick up D2T (Devcon 2 ton) there Another problem with 5 minute epoxy, it doesn't have enough time to level out on the bait... 30 minute epoxy will level itself and give you a smoother finish without the lumps you may get from 5 minute 2 Quote Link to comment Share on other sites More sharing options...
