flocknocker1 Posted February 27, 2017 Report Share Posted February 27, 2017 Has anyone used this by chance? Method of application and does it dry clear ? I assume it is applied after paint but before clear coat ? Thanks for any help on this. Quote Link to comment Share on other sites More sharing options...
JeffR Posted February 27, 2017 Report Share Posted February 27, 2017 I use it. It's basically white paint that reacts to UV, it's not clear. Quote Link to comment Share on other sites More sharing options...
flocknocker1 Posted February 27, 2017 Author Report Share Posted February 27, 2017 If you apply the glow under the paint do you get the same effect ? Quote Link to comment Share on other sites More sharing options...
AZ Fisher Posted February 27, 2017 Report Share Posted February 27, 2017 I recently bought and have used Wicked UV Glow Base. I sprayed it on as a clear coat after painting, then cleared with DT2 on some baits and KBS on others. The UV Glow tended to matte the paint finish some but glowed fairly well under a black light. On the Coast Airbrush website, if I remember correctly, it says to mix the base with other colors and spray. I would think that painting over the glow base would negate the glow effect, but haven't tried it. Quote Link to comment Share on other sites More sharing options...
mark poulson Posted February 27, 2017 Report Share Posted February 27, 2017 You might try using it as a base coat, and then putting your scale netting over it, so that the scale lines will glow afterwards. 1 Quote Link to comment Share on other sites More sharing options...
flocknocker1 Posted February 27, 2017 Author Report Share Posted February 27, 2017 It does seem that painting over the glow would negate the effect of the glow.Maybe mixing it in with a color is the way to go,as AZfisher suggested. Quote Link to comment Share on other sites More sharing options...
