RAVEN Posted February 27, 2017 Report Share Posted February 27, 2017 I want to get into injector molding. The thing is, I can make my own molds, but the price of a injector is a little pricey. Is there any way I can make one. Unless there is a cheap one on the market. Quote Link to comment Share on other sites More sharing options...
Anglinarcher Posted February 28, 2017 Report Share Posted February 28, 2017 Been looking for a "less expensive" one myself. The best I have found are the following: http://store.do-itmolds.com/Medium-Injector--4oz_p_325.html http://store.do-itmolds.com/Large-Injector--95-oz_p_269.html We want them to be safe, but, wow, a little expensive for hobbyist and low volume production. Good luck. Quote Link to comment Share on other sites More sharing options...
Cami Posted February 28, 2017 Report Share Posted February 28, 2017 Perhaps following link could be intersting http://baitmold.com/product-category/injectors/ Bye Cami Quote Link to comment Share on other sites More sharing options...
goldenshinner Posted March 1, 2017 Report Share Posted March 1, 2017 At one point there was tutorial on how to make one using i think some kind of pressure pot.that locks..you add air line from aquarium air pump then drill and tap and screw in a brass shut off facent valve.when you open valve it will flow thru.problem it won't work with glitter or anything that setles with adding a paint mixer to it... Then I imagine you will have trouble with flow rates if your make larger multi up cavity molds.. 100 up Quote Link to comment Share on other sites More sharing options...
goldenshinner Posted March 1, 2017 Report Share Posted March 1, 2017 Ohh of course air line will need to be copper Quote Link to comment Share on other sites More sharing options...
