zx250 Posted February 28, 2017 Report Share Posted February 28, 2017 Looking for a good hand injector. I have never poured soft plastic baits before. Any help would be great. Quote Link to comment Share on other sites More sharing options...
Fish_N_Fool Posted February 28, 2017 Report Share Posted February 28, 2017 There are a lot of good injectors out there I have some by Caney creek and they are great . Get one that is big enough to fill any molds you have now or think you will get. I have the largest one Caney creek makes and it's a bit spendy but a very good product. Quote Link to comment Share on other sites More sharing options...
Anglinarcher Posted February 28, 2017 Report Share Posted February 28, 2017 (edited) The following are options: http://www.basstackle.com/category_s/78.htm http://store.do-itmolds.com/Large-Injector--95-oz_p_269.html http://store.do-itmolds.com/Medium-Injector--4oz_p_325.html http://baitmold.com/product-category/injectors/ Try the following by contacting them, they had an inexpensive plastic model that works fine for small projects. http://www.pouryourownworms.com/Soft-Plastic-Worm-Mold-Kits_c64.htm As indicated, lots of options, but it all depends on what you are doing. Edited February 28, 2017 by Anglinarcher Added link Quote Link to comment Share on other sites More sharing options...
mark poulson Posted March 1, 2017 Report Share Posted March 1, 2017 I have an injector with a locking pin in the nozzle, as opposed to a screw in nozzle, and it is much faster to clean and reshoot. Plus I don't have to worry about the nozzle popping out on the pour. Quote Link to comment Share on other sites More sharing options...
DaBehr Posted March 1, 2017 Report Share Posted March 1, 2017 2x on the locking pin! The Basstackle injector is excellent. Quote Link to comment Share on other sites More sharing options...
Walking Dead Posted March 1, 2017 Report Share Posted March 1, 2017 https://www.btsmolds.com/injectors/ http://www.bearsbaits.com/Hand-Injectors_p_96.html http://stores.jacobsbaits.com/hand-injectors/ There maybe more out there. Recommend one with the safety pin. Quote Link to comment Share on other sites More sharing options...
zx250 Posted March 1, 2017 Author Report Share Posted March 1, 2017 I tried to call btsmolds today and did not get an answer and could not leave a message. Quote Link to comment Share on other sites More sharing options...
