FishCandy Posted March 2, 2019 Report Share Posted March 2, 2019 I use a continuous ten foot by 14 inch ribbon of the material. It fits on a jig that mounts ten lures at a time for faster painting. Quote Link to comment Share on other sites More sharing options...
Chuck Young Posted March 5, 2019 Report Share Posted March 5, 2019 Because lures come in so many sizes and patterns, it pays to have a variety on hand. Here is my approach to mesh. On the top of my spray booth I have several lengths of swim noodles cut in 1/2 and glued to the booth. Then 8" lengths of 3/8" dowels are inserted into the foam (not glued). Onto these, a variety of fabrics / materials are cut into long strips and wound. The lelftover material goes into a bag in my closet. These are organized into 4 categories: Bath sponge, Diamond, Hexagonal, and special. They are then organize on the dowels by group and size (X fine, fine, medium, and coarse). Sound expensive? It's not. I keep my eyes open for materials I can use. Most of them are free - like the little bags that garlic comes in. Material bought in fabric stores often cost $2 -$4 /yard. A yard will paint thousands of lures. I doubt that I have $20 invested in the whole setup. 1 Quote Link to comment Share on other sites More sharing options...
Mr.t Posted March 10, 2019 Report Share Posted March 10, 2019 The link to Amazon is showing 4mm I believe that is about the same size as 1/8 of an inch hole in the mesh that's gonna be bigger than what your looking for I think a mm is .039 inches so you probably need like a 2mm mesh fabric Quote Link to comment Share on other sites More sharing options...
