kris brantner Posted April 11, 2017 Report Share Posted April 11, 2017 Hey guys, it's been a while since I've visited the forums. Last time I was here you were talking about getting some basehole pins machined down to pour holes for the fg9s. Just wondering if you ever figured this out. I would like a few. Thanks Quote Link to comment Share on other sites More sharing options...
smalljaw Posted April 11, 2017 Report Share Posted April 11, 2017 Cadman had them made I believe. You're talking about the reducer pins that go in a regular 1/8" weed guard slot but leave the smaller hole for the FG-9 or FG-12 weed guard, right? You need to know that all weedless molds are different so the turned down side of the pin will be long so you'll need to lay it in the mold and put a hook down to see how much you need to trim off. So if you have a few different molds you want to use those pins in make sure to get about a dozen or so because one pin trimmed down for one mold might be too small for another mold. Quote Link to comment Share on other sites More sharing options...
cadman Posted April 11, 2017 Report Share Posted April 11, 2017 Kris, Yes I had plenty made. Pm me what you are looking for.. Quote Link to comment Share on other sites More sharing options...
