Kamillion Posted August 9, 2017 Report Share Posted August 9, 2017 (edited) Can somebody give me a rough idea of the number of jigs you get out of a gallon of plastic....I know ton of variables but just say a small 2" crappie jig....Thanks Edited August 9, 2017 by Kamillion Quote Link to comment Share on other sites More sharing options...
SRJ Posted August 9, 2017 Report Share Posted August 9, 2017 Take 10 of the baits you want to make. Get gram weight divide by 10. Move grams to ounces. Now you know the plastic weight of 1 bait. Translate ounces in a gallon and you have your answer! 1 Quote Link to comment Share on other sites More sharing options...
Cub48 Posted August 9, 2017 Report Share Posted August 9, 2017 i get 350 or more with 2 pints that is with no remelt of spurs and i have a plug in each pot so if u include these i would say 400 per 2 pints or a quart . i think i do around 250 with a pint when using a single injector and remelting plugs and spurs. The best way is take a cup with a single injector and see how many u can shoot as different molds have larger spurs and and some have smaller spurs i am also removing my seconds from this amount air bubbles and bad dents maybe 35 or more the reason on the 2 pint is i am not remelting using the mini shooting star and i have a good size plug in each pot. i later shoot the spurs when i have time or enough saved up to do a batch Cub48 1 Quote Link to comment Share on other sites More sharing options...
Kamillion Posted August 10, 2017 Author Report Share Posted August 10, 2017 Thanks for the help Quote Link to comment Share on other sites More sharing options...
