ravenlures Posted August 22, 2017 Report Share Posted August 22, 2017 I did a search but could not find anything. Has anyone come up with a vibrating for pouring resin lures. Does it help with large voids or just need to put bleeders in mold. wayne Quote Link to comment Share on other sites More sharing options...
wbtitl0 Posted August 22, 2017 Report Share Posted August 22, 2017 Get a vibrating Case Tumbler for reloading ammo. Bolt it to your mold table. Should be able to find a used one on Craigslist. https://www.amazon.com/Frankford-Arsenal-Quick-n-EZ-Case-Tumbler/dp/B01N02YTPJ Quote Link to comment Share on other sites More sharing options...
Anglinarcher Posted August 22, 2017 Report Share Posted August 22, 2017 10 hours ago, ravenlures said: I did a search but could not find anything. Has anyone come up with a vibrating for pouring resin lures. Does it help with large voids or just need to put bleeders in mold. wayne It has been talked about before, but to date, I don't recall anyone ever reporting back on it. Either it works very well and is a well kept secret or it works so poorly no one wants to admit they tried it. LOL If you do take wbtitl0 's advice, let us know how it works. You might contact a testing lab for concrete and see if they will let you use theirs for a few minutes to try it. Maybe, just perhaps......... Quote Link to comment Share on other sites More sharing options...
mark poulson Posted August 23, 2017 Report Share Posted August 23, 2017 I don't know if it would work for resin, but when I make a POP two part mold, I use a palm sander on the second half, and it works to get the air bubble up off the meeting faces...mostly. 1 Quote Link to comment Share on other sites More sharing options...
ravenlures Posted August 23, 2017 Author Report Share Posted August 23, 2017 I have a vibrator from a football game that I plan on making a table with. Wayne 1 Quote Link to comment Share on other sites More sharing options...
Chuck Young Posted August 28, 2017 Report Share Posted August 28, 2017 Try putting an orbital finishing sander on the table and weighting it down. 1 Quote Link to comment Share on other sites More sharing options...
