WVangler Posted December 7, 2017 Report Share Posted December 7, 2017 I have a do it split shot mold. I have a hard time pouring small split shot. I'm using soft lead. Any tips? Thank you. 1 Quote Link to comment Share on other sites More sharing options...
Kasilofchrisn Posted December 7, 2017 Report Share Posted December 7, 2017 Have you sprayed Drop Out into this mold? That's the first thing I would try. Also need good hot lead and a good hot mold. 1 Quote Link to comment Share on other sites More sharing options...
cadman Posted December 8, 2017 Report Share Posted December 8, 2017 What Chris mentioned above. Also in order to open and close the split shot when you use it, you will need very soft lead. That is the point of the re-usable split shot. 1 Quote Link to comment Share on other sites More sharing options...
WVangler Posted December 11, 2017 Author Report Share Posted December 11, 2017 The talcum powder did the job. Thank you! Quote Link to comment Share on other sites More sharing options...
