IKEjr Posted December 31, 2017 Report Share Posted December 31, 2017 I' looking for a Ned rig mold that I can use 2/0-3/0 hook.im using ZMAN BIG TRD'S Quote Link to comment Share on other sites More sharing options...
basskat Posted December 31, 2017 Report Share Posted December 31, 2017 (edited) I use 2\0 & 3/0 in the Do-It Midwest mold. Barlow's has a list of hooks that will work. Edited December 31, 2017 by basskat 1 Quote Link to comment Share on other sites More sharing options...
Jig Man Posted December 31, 2017 Report Share Posted December 31, 2017 Not all of the hooks in the list work well with that mold. I bought 1000 hooks from the list and had to use high temp rtv to stop the flashing that I was getting. 1 Quote Link to comment Share on other sites More sharing options...
m.t.pockets Posted December 31, 2017 Report Share Posted December 31, 2017 Its easier to just use PLUMBERS PUTTY to fill in the areas. Doesn't harden and easy to remove Quote Link to comment Share on other sites More sharing options...
21xdc Posted December 31, 2017 Report Share Posted December 31, 2017 Plumbers putty melts and fails after the mold gets hot... Works good for small sessions though. Quote Link to comment Share on other sites More sharing options...
LimpNoodle Posted January 1, 2018 Report Share Posted January 1, 2018 I've ran 200-300 pieces with plumbers putty without problem, Not small stuff either 1-2 ounce range. Quote Link to comment Share on other sites More sharing options...
21xdc Posted January 1, 2018 Report Share Posted January 1, 2018 (edited) You must use better plumbers putty... LOL... I quit using it. I started using this as a much better temporary option.. https://www.rotometals.com/casting-retainer-putty-1-pound/ Edited January 1, 2018 by 21xdc 2 Quote Link to comment Share on other sites More sharing options...
dblades Posted January 2, 2018 Report Share Posted January 2, 2018 You're killing the baits action by using a hook that large. Quote Link to comment Share on other sites More sharing options...
