mangeboy79 Posted September 30, 2004 Report Share Posted September 30, 2004 i were looking at screw eyes at musky shop and the diameter was given in some to me strange scale. the numbers were 154; and 105; can some one tell me what this is in millimeters? Quote Link to comment Share on other sites More sharing options...
Coley Posted September 30, 2004 Report Share Posted September 30, 2004 If that number is .154 then it equals 3.911 mm and if the number .105 then it equals 2.667 mm Here is a website you can use for the conversion: http://www.mhc-online.com/main2/metric_conversion_chart.htm Coley Quote Link to comment Share on other sites More sharing options...
mangeboy79 Posted September 30, 2004 Author Report Share Posted September 30, 2004 thanks coley Quote Link to comment Share on other sites More sharing options...
out2llunge Posted September 30, 2004 Report Share Posted September 30, 2004 Those seem like odd sizes. Most musky sized screw eyes are made from .092" stainless wire and are from 1/2 to 1 7/16" long. What was the site you visited to get those sizes? BTW, I use the .092" eyes in 95% of my baits. Quote Link to comment Share on other sites More sharing options...
mangeboy79 Posted September 30, 2004 Author Report Share Posted September 30, 2004 the site was www.muskyshop.com and i think its the diameter of the eye? Quote Link to comment Share on other sites More sharing options...
out2llunge Posted October 1, 2004 Report Share Posted October 1, 2004 If these http://www.muskyshop.com/modules/cart/products.php/nav_id/5/page/2/id/1123/name/StainlessSteelScrewEyes78114 are the ones you are talking about. I don't see any info about diameter. Like I said before, usually they're .092", but these ones might be smaller. Quote Link to comment Share on other sites More sharing options...
ckarren Posted October 1, 2004 Report Share Posted October 1, 2004 Out2llunge is correct, the wire diameter is (.092). This is the size I use in all my muskie lures. I looked at there eyehooks once, and they have the same as Moore?s Lures. That number is the inside diameter of the eye. (.154) This is biggest I have seen form suppliers in Stainless Steel. -Corey Quote Link to comment Share on other sites More sharing options...
