Painter1 Posted January 25, 2018 Report Share Posted January 25, 2018 I use some flashabou in a lot of the jigs I make. A lot of experimentation has helped dial it in for hair, silicon & combo jigs. I owe a lot to Small jaw and his instructive videos. He sets the imagination to work. I bought this stand/wheel from barlow’s but as you can see in the picture not all of the packaged material fit well in it. your thoughts and suggestions are most welcome. Quote Link to comment Share on other sites More sharing options...
Anglinarcher Posted January 25, 2018 Report Share Posted January 25, 2018 Great idea, but I see that it needs to be taller and the groves need to be wider, and I would make the wheel bigger to hold more options. Looks like a fairly simple project for the woodworkers here. I would do it for you but I and my wife sold all of my woodworking tools before our last move. Quote Link to comment Share on other sites More sharing options...
Good Fishing Posted January 26, 2018 Report Share Posted January 26, 2018 Painter1, For the stand to work properly, you need to insert the flashabou so it cascades (for lack of a better word) over the edge of the stand. For flashabou, that means inserting the wired end into the hole on the stand. For flashabou accent you should insert the zip tie around the center. Here are a few pics that hopefully explain what I mean: Hope this helps. If you're still unhappy with the stand you can PM me and we'll arrange a return. Good fishing! -Matt Barlow 1 1 Quote Link to comment Share on other sites More sharing options...
smalljaw Posted January 26, 2018 Report Share Posted January 26, 2018 I like that!!!!! Quote Link to comment Share on other sites More sharing options...
Painter1 Posted January 27, 2018 Author Report Share Posted January 27, 2018 Thanks for the instruction, sir Quote Link to comment Share on other sites More sharing options...
