BuMMeRBaits Posted October 2, 2004 Report Share Posted October 2, 2004 What is the difference between a blood line and a vein. I have noticed that on some baits, say a 2 color pour, you have the top color, middle color, bottom color, and the middle color is seen just like the other layers. Where as some of the others looks like the second color is inside the bait itself. I have been trying to do some of these, and cannot ever seem to get them right. I pour the top color, middle color, bottom color, but the middle color always seems to go all the way out to the sides of the baits and never does it look like the middle color is actually "inside" the bait. I have read through some of the other posts on this, and the idea of pre-pouring the vien/blood line, and putting it in the bait after the top pour is done, looks like the only way to accompolish this, but everyone was against doing it that way. ANy ideas or suiggestions would be greatly appreciated. Quote Link to comment Share on other sites More sharing options...
siebler_custom_baits Posted October 2, 2004 Report Share Posted October 2, 2004 you need to wait a little longer so the plastic doesnt go outside. The way your doing it is a split vein. It is good with clear type top/bottom colors Quote Link to comment Share on other sites More sharing options...
