Twin Spin Wire Form

[Baldy]

I am looking at making some large twin spin musky spinnerbaits. I am looking for some tips on making the twin spin portion of this lure. Anyone have experience or tips for making these?

Thanks -

Baldy

[Richoc]

I make a twin muskie buzz bait.

Can give some direction, as to how.

I use brazing to put the wire form together.

Not just a larger bass form bent together form that way.

You can also change the mold to take 2 wire forms.

R-bend them and bend the wires out from there.

[Baldy]

got any pictures?

[Richoc]

I will see if I can get one.

I do not have a dig. camera.

[Baldy]

Thanks, Richoc. I have another idea to try in my head. Just have to try and get it perfected.

[Richoc]

There are 3 ways I have done it.

The last is the easy one.

The 2 full wire method.

The full wire, with twisting in a second length of wire.

Then braze.

Short wire with a u shaped wire, then braze.( easy one)

[Richoc]

Ok this is a scan.

I hope you can see how it is 2 .051 ss. wires brazed together then bent up for the blade arms.

You will need to use mapp gas, and silver brazing compond and flux.

I got mine at the local welding supply shop.

1 troy oz. of the stuff and the flux was like $36.

Will do a lot of wires though.

This braze is over a 1/2 inch long and should be a strong as the wire is.

As posted this is not the only way I have done these but it has turned out to be the easy way.

[Baldy]

Thanks. That looks like a nice bait you have there. I am going to give that method a try.