Rnd101 Posted February 8, 2018 Report Share Posted February 8, 2018 How would you get a matte finish on your wiggle wart baits? I love fishing the storm wiggle wart and am painting lures and was wondering how one would get the matte finish. Quote Link to comment Share on other sites More sharing options...
DingerBaits Posted February 8, 2018 Report Share Posted February 8, 2018 If you use KBS, you can dip it in KBS let it cure, then spray a flat clear over it such as rustoleum. I was told this works by a credible person. 2 Quote Link to comment Share on other sites More sharing options...
Rnd101 Posted February 10, 2018 Author Report Share Posted February 10, 2018 i am using the etex lite 30 min epoxy i wonder if it would still work on that? Quote Link to comment Share on other sites More sharing options...
Benzin555 Posted February 10, 2018 Report Share Posted February 10, 2018 Yes it will work over ETex as well. I have had pretty good results using the process explained by Dinger. Here is a shad rap repaint using the process. A Swimbait as well 1 Quote Link to comment Share on other sites More sharing options...
Matt Jackson Posted February 11, 2018 Report Share Posted February 11, 2018 So just spraycan rustoleum flat clear? It to want to try this. Quote Link to comment Share on other sites More sharing options...
Hughesy Posted February 11, 2018 Report Share Posted February 11, 2018 Nice work Benzin 555!!!!!! Quote Link to comment Share on other sites More sharing options...
mark poulson Posted February 12, 2018 Report Share Posted February 12, 2018 18 hours ago, Matt Jackson said: So just spraycan rustoleum flat clear? It to want to try this. Just remember that the spray can rustoleum will react and soften if it is left in contact with plastisol baits. Quote Link to comment Share on other sites More sharing options...
KClark Posted June 18, 2018 Report Share Posted June 18, 2018 I found out by mistake that the Diamond finish in the aerosol can is a flat finish. I thought that I was doing something wrong so I looked it up on their web site. "If a flat finish is what you are after. Use the aerosol" 1 Quote Link to comment Share on other sites More sharing options...
Chuck Young Posted June 19, 2018 Report Share Posted June 19, 2018 Great job with this thread! Quote Link to comment Share on other sites More sharing options...
jcv_cw Posted June 21, 2018 Report Share Posted June 21, 2018 something new and been looking for. thanks guys! Quote Link to comment Share on other sites More sharing options...
basscat28 Posted June 26, 2018 Report Share Posted June 26, 2018 https://www.lowes.com/pd/Plasti-Dip-11-fl-oz-Clear-Aerosol-Spray-Coating/3760699?cm_mmc=SCE_PLA_ONLY-_-Paint-_-SprayPaint-_-3760699:Plasti_Dip&CAWELAID=&kpid=3760699&CAGPSPN=pla&k_clickID=4b5c9464-5332-4bd1-9d76-6ac4f4174e23&gclid=EAIaIQobChMI-LOTxLjw2wIV1LXACh00CAYJEAQYASABEgJXs_D_BwE This stuff works great! Quote Link to comment Share on other sites More sharing options...
mark poulson Posted June 26, 2018 Report Share Posted June 26, 2018 13 hours ago, basscat28 said: https://www.lowes.com/pd/Plasti-Dip-11-fl-oz-Clear-Aerosol-Spray-Coating/3760699?cm_mmc=SCE_PLA_ONLY-_-Paint-_-SprayPaint-_-3760699:Plasti_Dip&CAWELAID=&kpid=3760699&CAGPSPN=pla&k_clickID=4b5c9464-5332-4bd1-9d76-6ac4f4174e23&gclid=EAIaIQobChMI-LOTxLjw2wIV1LXACh00CAYJEAQYASABEgJXs_D_BwE This stuff works great! Several years ago, when Butch Brown began making his custom glide baits, I tried that Plasti-Dip spray, to see if I could get that kind of a soft textured bait. It worked, but you have to keep a coated bait away from soft plastic baits, or it will melt, and ruin the paint scheme. Quote Link to comment Share on other sites More sharing options...
