TerryF2858 Posted April 1, 2018 Report Share Posted April 1, 2018 if anyone makes these bodies, from the do-it mold, could you give me measurements for the 1/16 and 1/8 sizes, I am trying to match the old brass body I used before and the price for them has gone way up so may go to this body, or buy them if anyone sells them either painted or not painted. thanks t Quote Link to comment Share on other sites More sharing options...
JimP Posted April 2, 2018 Report Share Posted April 2, 2018 Terry: I think you are inquiring about the inline spinner bodies. Model (LB - 5 - A) The 1/8 oz is 20 mm X 4 mm The 1/16 oz is 14 mm X 3.9 mm The 1/32 oz is 11 mm X 3 mm Powder coat is the best way to coat them and I prefer to cast them directly onto the wire that will be used for the spinner. I purchased this mold for the same reason you mention, the cost of the brass bodies. These will serve your purpose very well. 1 Quote Link to comment Share on other sites More sharing options...
