tubetragger Posted April 8, 2018 Report Share Posted April 8, 2018 Just fired up my pot for the first time this year and the lead wasn't flowing at all when I lifted the lever, so I drained all of the lead took the plunger assembly off and cleaned it and the pot. I then put new lead back in and still had the same issue..... my question is when I stick a piece of wire in from the bottom of the pot to try and clear the blockage should I be able to see the wire from the inside....???? Quote Link to comment Share on other sites More sharing options...
LimpNoodle Posted April 8, 2018 Report Share Posted April 8, 2018 Of course. Quote Link to comment Share on other sites More sharing options...
gaspumper Posted April 9, 2018 Report Share Posted April 9, 2018 I took a drill bit the same size as the hole in the spout, and ran it through from the outside,you wouldn't believe the rust and crud that came out. I also took the plunger and cleaned the tip with emery cloth,I get very few drips now. Quote Link to comment Share on other sites More sharing options...
tubetragger Posted April 10, 2018 Author Report Share Posted April 10, 2018 thanks guys Quote Link to comment Share on other sites More sharing options...
