dsqui Posted May 15, 2018 Report Share Posted May 15, 2018 Is anyone pouring this jig. Quote Link to comment Share on other sites More sharing options...
Painter1 Posted May 26, 2018 Report Share Posted May 26, 2018 I have the mold and poured a few. They pour well, but I just don’t use them much. Quote Link to comment Share on other sites More sharing options...
dsqui Posted May 26, 2018 Author Report Share Posted May 26, 2018 On 5/26/2018 at 4:30 AM, Painter1 said: I have the mold and poured a few. They pour well, but I just don’t use them much. Expand How big are they...i have a thirteen inch worm mold and throw them on big football heads and debated on trying them on one of these. Quote Link to comment Share on other sites More sharing options...
Walking Dead Posted May 26, 2018 Report Share Posted May 26, 2018 I pour them but do not care for the bait keeper. Modified one for a coil bait keeper and another for a wire “hook” keeper. 1 1/4 ounce is a pretty big head. Quote Link to comment Share on other sites More sharing options...
Painter1 Posted May 26, 2018 Report Share Posted May 26, 2018 It’s a heavy head but I would think about something with a much longer shank hook. For instance, Jenkins makes a swimbait head in 1/4 ounce with a 9/0 hook. The shaft of the hook is very long. I don’t know that you could get a similar hook for that mold. I had a guy make me a custom Magnum Shakey Head mold for use with 12”-14” worms on Lake Falcon. It is heavy and utilizes a big hook. Quote Link to comment Share on other sites More sharing options...
wootonc Posted May 30, 2018 Report Share Posted May 30, 2018 I have put the 7/0 gami hook in mine and throw 10 to 12 inch worms on them alot also eagle claw makes a 7/0 wide gap that I sell alot of them in it also. Quote Link to comment Share on other sites More sharing options...
