Painter1 Posted May 25, 2018 Report Share Posted May 25, 2018 (edited) I need to find someone that can / will modify a mold. I have lost touch with the fellow who modified some of my Do -It jig molds, with minor alterations in the past. I have a standard ball head jig mold I want modified to add weight behind the head as desired by an older friend of mine. He is down to his last few and I promised to see what I could do to help him. A cylinder of lead needs to extend from the back of the 5/16 ball head and down the shaft appx 1/2 inch; so that area needs to be machined out in a manner that achieves equal distribution around the shaft. The needed work is beyond my capabilities. I have a prototype jig, the mold and the hooks. I would welcome suggestions on who might be able to help with this project. Edited May 25, 2018 by Painter1 Quote Link to comment Share on other sites More sharing options...
dlaery Posted May 25, 2018 Report Share Posted May 25, 2018 what is the diameter is the cylinder? is is a do-it mold? Quote Link to comment Share on other sites More sharing options...
Painter1 Posted May 26, 2018 Author Report Share Posted May 26, 2018 10 hours ago, dlaery said: what is the diameter is the cylinder? is is a do-it mold? It is a DO-IT ball head mold. guessing cylinder diameter is 3/8”, length 1/2” Quote Link to comment Share on other sites More sharing options...
dlaery Posted May 26, 2018 Report Share Posted May 26, 2018 If you want to call or email me we could talk. 660-547-2874 david at hooksollutions.com Quote Link to comment Share on other sites More sharing options...
dlaery Posted May 26, 2018 Report Share Posted May 26, 2018 this is what it would look like. it would weigh approx 11/16oz 1 Quote Link to comment Share on other sites More sharing options...
