rockslide Posted July 15, 2018 Report Share Posted July 15, 2018 has anyone mixed there micro balloons with worm oil? i was thinking about buying some an mixing them 1 to 1 ratio for safer easier use. im looking to make high float claws Quote Link to comment Share on other sites More sharing options...
robalo01 Posted July 18, 2018 Report Share Posted July 18, 2018 I have mixed microbaloons with plastic. It works, but it messes up the colors. Why would you mix it with worm oil? Quote Link to comment Share on other sites More sharing options...
wallyc14 Posted July 19, 2018 Report Share Posted July 19, 2018 (edited) Never tried in softner . The only problem I could for see is the balloons are going to want to float on top of softnerlike they do when you heat them up in plastic. To be honest with you when I use them I’ll put them right under my vent hood and wear a respirator just in case if you’re very careful with them you should be ok. I have never had a problem but I have a large vent capable of moving a lot of air.it will pull the air out of my bait shop in a couple of minutes. So I don’t worry so much about it getting air born. Ps anything you can do to limit your exposure to it is a good thing. Edited July 19, 2018 by wallyc14 2 Quote Link to comment Share on other sites More sharing options...
rockslide Posted July 22, 2018 Author Report Share Posted July 22, 2018 On 7/17/2018 at 6:01 PM, robalo01 said: I have mixed microbaloons with plastic. It works, but it messes up the colors. Why would you mix it with worm oil? i was trying to mix them in something in an attempt to make them easier to handle Quote Link to comment Share on other sites More sharing options...
rockslide Posted July 22, 2018 Author Report Share Posted July 22, 2018 On 7/19/2018 at 11:26 AM, wallyc14 said: Never tried in softner . The only problem I could for see is the balloons are going to want to float on top of softnerlike they do when you heat them up in plastic. To be honest with you when I use them I’ll put them right under my vent hood and wear a respirator just in case if you’re very careful with them you should be ok. I have never had a problem but I have a large vent capable of moving a lot of air.it will pull the air out of my bait shop in a couple of minutes. So I don’t worry so much about it getting air born. Ps anything you can do to limit your exposure to it is a good thing. thanks for the help! Quote Link to comment Share on other sites More sharing options...
rockslide Posted July 22, 2018 Author Report Share Posted July 22, 2018 i haven't used them or even open them because im looking for the safest way to handle them Quote Link to comment Share on other sites More sharing options...
wallyc14 Posted July 22, 2018 Report Share Posted July 22, 2018 Safest way I know is to use them is to 1- wear a Respirator When mixing in to plastic 2- make sure there is no cross breeze or anything like that it takes nothing to get them airborne 3- use them under a vent hood Number one being the biggest 1 Quote Link to comment Share on other sites More sharing options...
