Blackstone Posted November 7, 2018 Report Share Posted November 7, 2018 New to this but having trouble with epoxy closing off the eyelets on my crank-baits when finishing them. Any advise? Quote Link to comment Share on other sites More sharing options...
BobP Posted November 7, 2018 Report Share Posted November 7, 2018 I don’t pay it any attention when epoxying. When cured, I use a millimeter drill bit in my Dremel to zip out the epoxy and paint that accumulated. 2 Quote Link to comment Share on other sites More sharing options...
21xdc Posted November 7, 2018 Report Share Posted November 7, 2018 Monte, He is talking about lure hanger eyes... I use a coned Dremel bit to clean mine out the next day. Similar to these... Quote Link to comment Share on other sites More sharing options...
Blackstone Posted November 7, 2018 Author Report Share Posted November 7, 2018 I had thought about that I guess Ill have to try it and see. Quote Link to comment Share on other sites More sharing options...
JayBee Posted November 8, 2018 Report Share Posted November 8, 2018 An exacto knife works for me. Punch the tip of the blade through the epoxy and scrape it out of the hanger. Quote Link to comment Share on other sites More sharing options...
fishon-son Posted November 10, 2018 Report Share Posted November 10, 2018 I think your to heavy on the epoxy thin it and put just a little by the hook hangers Quote Link to comment Share on other sites More sharing options...
