smalliebiggs Posted November 26, 2018 Report Share Posted November 26, 2018 Looking for suggestions to make base pins for 1/8-3/8 cavaties. Mold calls for 5/64 weedguard. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
Munkin Posted November 26, 2018 Report Share Posted November 26, 2018 They make those in both metal and Teflon. Allen Quote Link to comment Share on other sites More sharing options...
smalljaw Posted November 26, 2018 Report Share Posted November 26, 2018 8 hours ago, Munkin said: They make those in both metal and Teflon. Allen Where?? The 5/64" is an FG-12. Quote Link to comment Share on other sites More sharing options...
smalljaw Posted November 26, 2018 Report Share Posted November 26, 2018 Go to speedy metals and get a piece of round stock in the 304 stainless rod, they have the 5/64" diameter you want. http://www.speedymetals.com/pc-1838-8270-564-rd-304-stainless-steel-cold-finished-annealed.aspx 1 Quote Link to comment Share on other sites More sharing options...
Jig Man Posted November 26, 2018 Report Share Posted November 26, 2018 I use 10 ga house romex with the insulation removed. Quote Link to comment Share on other sites More sharing options...
Kasilofchrisn Posted November 26, 2018 Report Share Posted November 26, 2018 (edited) It seems this has been asked before. Check out this thread for ideas. http://www.tackleunderground.com/community/topic/26083-564-teflon-pins-for-poison-tail-jig-18-oz/ Edited November 26, 2018 by Kasilofchrisn 1 Quote Link to comment Share on other sites More sharing options...
