WA_Walleye Posted January 19, 2019 Report Share Posted January 19, 2019 Running EC 2/0 an 3/0 jig hooks models 410 and 630. Want to experiment and need a round bend hook that will fit in the same Do-It Ultra Minnow mold SHR-4-M. Would appreciate some suggestions if others have already figured this out. Thanks, Brian it Quote Link to comment Share on other sites More sharing options...
cadman Posted January 20, 2019 Report Share Posted January 20, 2019 Mustad #32786 hooks will fit in that mold if you are looking for black nickle hooks. Eagle Claw has a comparable hook to Mustad for a lesser cost. 1 Quote Link to comment Share on other sites More sharing options...
smalljaw Posted January 20, 2019 Report Share Posted January 20, 2019 I'm really liking the VMC 7161 as a 410 replacement. The Gamakatsu Steelhead hook only runs to a 2/0 but should be close enough to the 630 to be considered or perhaps the 604 might work. Quote Link to comment Share on other sites More sharing options...
mark poulson Posted January 20, 2019 Report Share Posted January 20, 2019 5 hours ago, smalljaw said: I'm really liking the VMC 7161 as a 410 replacement. The Gamakatsu Steelhead hook only runs to a 2/0 but should be close enough to the 630 to be considered or perhaps the 604 might work. Are the VMC 7161 hooks as strong as the Mustad 32786 hooks? Quote Link to comment Share on other sites More sharing options...
smalljaw Posted January 20, 2019 Report Share Posted January 20, 2019 4 hours ago, mark poulson said: Are the VMC 7161 hooks as strong as the Mustad 32786 hooks? Yes, without a doubt!! 1 Quote Link to comment Share on other sites More sharing options...
